How I Made That: Katniss's "Catching Fire" Wedding Gown Wings
So, I'm going to start a new category here on the blog: "How I made that". Not QUITE a costuming tutorial, but with enough information, photos, etc to help you on your way!
So, let's start this off: The wings on Katniss's wedding gown in "Catching Fire". You all remember my adorable Mini Katniss, right? That's her over to the right - Great kid! She rocked that costume all the way to a "Best Workmanship" win at Convergence this past summer. The wings on that gown is one of the costume elements I've been asked about the most, and it was actually quite easy to do!
The first thing I had to do was to gather reference images. This was easy for the front - there were some gorgeous, hi-res images online, including the magazine photo that Mini Katniss's portrait was based on. The back was not so easy - I ended up having to put the Blu-Ray on, and pause/photograph my TV screen when it came to the perfect, clear view of the back of the gown:
From there, I opened the front and back images up in Photoshop, and sized them to a printing size that would reflect my Mini-Katniss's actual size. That is, I used Mini Katniss's backwaist measurement to determine the print size of the photo, by using markers on that original photo - where Jennifer Lawrence's waist and prominent vertebra in her neck is. I tweaked it slightly to work with Mini Katniss's shoulder measurement: She has the build of an 11 year old girl, after all: the proportions are a little different than from a grown woman!
Once I had it properly sized, I set the file to print at a lighter opacity - probably 60%? - and divided each file up into 8x10 sized sections. I printed them all out, and assembled them together with tape. This created the template for the two wings.
Using a thick black marker, I traced over all of the lines on the wing in each template. Combined with the less vibrant printing, this would allow the pattern to easily show through the parchment paper I'd use in the next step.
One wing at a time, I taped the template down to my work surface, and covered with a large piece of parchment paper. Using Instamorph (The stuff I got into more detail about in my Thranduil Crown Tutorial), I stretched hot strips of Instamorph into long "snakes", and laid them out following the pattern I'd made. I continued this until the entire wing design was laid out, then let it cool.
Then, I went back over it with a heat gun. At every intersection of pieces, I heated the area up and gently pressed the pieces together to form a lasting bond. This is important! When laying the design out, the pieces cool too fast to bond with each other, and you really want that security.
Once everything was bonded and cooled, I had to shape it. I started with the bending at the points above the shoulder of the dress, by heating the whole area with a heat gun, and propping it up til it cooled:
As it turned out, the sizing/shaping of my dress form was pretty similar to Mini Katniss, so I covered it in foil to protect it, and used the heat gun to mold the pieces to shape:
From there, both sides of each wing were hit with grey primer:
A mirror-finish shiny metallic spray paint (that I ended up not liking):
... and, finally, with a white glitter spray that I used to tone down the obnoxious shine of the metallic silver:
At that point, the outward-facing sides of the wings were accented with crystals. Use the GOOD, Swarovski ones for maximum shine! I used E-6000 to glue them down:
At this point, the wings themselves were finished, and all that remained was attaching them to the gown. Early on, I had decided that they would need to be easily removable - we were talking about an 11 year old girl, after all. Had to keep logistics in mind!
I also knew that she intended to spend most of her time in the gown SPINNING (who could blame her?), so I knew the attachment would have to withstand that force. The solution? Ribbon ties!
I pinned the wings into place on the dress, which had been sewn and fit, but not FINISHED (feathers). I took great care to make sure everything was in place where I'd want it to be, and this would provide the guide not only for where the ribbons would be sewn on, but where the feathers would be stitched as well:
So I pinned along where the edges of the wings were, as a guide, and made note of where ribbons should go - I think I sewed 3 each on the front and back. On the front, this was up near the top of the left side of the bodice (her left), one at the right side of her waist, and one at her left hip. This held it in place well.
I machine sewed the middle of each length of ribbon right to the bodice, then pinned the ribbons up and out of the way for sewing all of those feathers down:
To wear it, she put the gown on. A wing was positioned where it was to go, and the ends of one ribbon were pulled through to the front of the wing, one end on each side of a line of wing. A bow was tied over that dividing line of wing, and the loops and ends were carefully pulled back through to be hidden and secured behind the wing. It was a beautiful thing!
The finished product:
More Sewing and Costuming Tutorials!
In the mood to sew, or otherwise craft something costume-related? Here are some more tutorial posts for you!
Adding a Non-Slip Sole to Boot Covers
DIY Maleficent Horns / Headpiece
Dwarf Wigs Part 1: Making Wefts
Dwarf Wigs Part 2: Sewing and Styling
Dwarf Wigs Part 3: Reusable Beard
Handmaid's Tale Bonnet Tutorial
Handmaid's Tale Wings Tutorial
Maleficent Staff DIY Tutorial
Ronan the Accuser Makeup Tutorial
Thranduil Crown Tutorial
Triceracop Cosplay Tutorial
More Cosplay Posts
Cosplay Photography Tips
Loki Costume Progress Photos
Mini Katniss Wedding Gown
Molded Smaug Top
My Convention Survival Guide
Rogue Cosplay Surprise
The Two Week Thorin Costume
The Two Week Thranduil Costume
The Maleficent Costume
Share the Love!
Also, be sure to subscribe to my free monthly email newsletter, so you never miss out on any of my nonsense.
Well, the published nonsense, anyway!